Husky Paint Guns: Are They Any Good?

Expert’s answer:

Husky paint guns have received mixed reviews from customers. Some customers have reported positive experiences with Husky paint guns, stating that they provide excellent spray and precise results. They have also mentioned that the guns are easy to use and offer good value for the price. However, there are also customers who have expressed dissatisfaction with the quality and performance of Husky paint guns. They have mentioned issues such as paint gun errors, lack of clear instructions, and the need for better customer support. It is important to note that individual experiences may vary, and it is always a good idea to research and read multiple reviews before making a purchasing decision.

Husky paint guns are they any good for cars
Husky paint guns are they any good for cars – (Image Source: Pixabay.com)

Which spray paint gun manufacturer is reputable?

Because it produces smooth results on a variety of surfaces, including fences, furniture, and interior walls, we believe that this handheld airless paint sprayer is the best option for the majority of DIY enthusiasts.

It is lightweight and simple to use, despite being a little noisy, and there is no need to thin the paint. According to Rachel Rothman, head technologist at the Good Housekeeping Institute, “We also like that this sprayer can be used upside down — nice if you’re painting a ceiling”. According to our paint sprayer tests, she continues, Graco has a demonstrated track record for performance and dependability.

Additionally, the sprayer includes a variety of tips, which neatly store inside the handle. Despite the fact that you’ll need an extension cord for most projects, the Graco’s corded electric operation allows for unlimited running time.

Husky paint guns are they any good amazon
Husky paint guns are they any good amazon – (Image Source: Pixabay.com)

What HVLP sprayer is the most cost-effective?

Wagner Spraytech Control Spray Max HVLP Sprayer is the all-around best sprayer. NEU MASTER 600 Watt High Power HVLP Paint Spray Gun is the best value. Earlex HV5500 HVLP Spray Station Paint Sprayer is a top upgrade pick. HomeRight C800766 Finish Max Paint Sprayer is the most portable model. High performance HVLP sprayer from the Master Pro 44 Series is the best professional.

By using the products on this page and taking part in affiliate programs, we might be able to make money.

Spray guns have a rep for being difficult to use, but modern HVLP (high volume, low pressure) models designed for DIYers and hobbyists are simple to use, can significantly cut down on the time it takes to stain or paint, and can help create a beautiful and even finish without brush or roller marks.

It can be difficult to decide which HVLP spray gun is best to purchase because of the variety of HVLP spray guns that are now readily available due to their rising popularity. Here is a detailed look at how to pick the best HVLP spray gun, along with a list of some of the best options available, to help resolve that conundrum.

Husky spray gun price
Husky spray gun price – (Image Source: Pixabay.com)

Which professional automotive paint gun is the best?

Professionals will love the Super Nova HVLP Spray Gun from IWATA because it has a quick-release air cap, a responsive trigger, and an ergonomic grip. Stable air flow control makes it simple to produce professional results without putting too much stress on your wrists or taking up too much of your valuable time.

One of the most accurate guns available, the SATAjet 1500 also provides a consistent spray pattern. This gun is excellent for professionals who need a high-quality job in a short amount of time because it has an improved air pressure range and a quick working speed.

This DeVilbiss gun is a very effective tool because it has a faster application speed while still maintaining low pressure. The painter has more control over the gun thanks to its sleek design, and it is simple to set up and operate. It is also quieter than most comparable guns. The distribution of fine lines will also be uniform and ensured to be even.

Husky hvlp spray gun manual
Husky hvlp spray gun manual – (Image Source: Pixabay.com)

With a spray gun, how many coats of paint are applied?

The thickness of the paint being applied is measured in mil thickness, but how do you actually know if you got your two coats? The minimum wet standard at Sherwin Williams is 4 mil. While a roller brush typically requires two coats to achieve the 4 mil standard and takes more time and labor, a sprayer can achieve over the 4 mil thickness in one coat and provide the most uniform paint job. ASK IF THEY ARE USING A ROLLER BRUSH OR A SPRAYER IF YOUR CONTRACTOR IS SELLING YOU TWO COATS OF PAINT. A sprayer is typically used by professional painters. If he says two coats using a sprayer, you should probe further to find out exactly what he means by two coats. The drying procedure is the key to the solution you’re looking for.

You can paint in temperatures as low as 35° F with Sherwin Williams’ Duration, Resilience, SuperPaint, and A-100 Exterior products. Traditional latex-based paints, in contrast, need temperatures above 60° F to properly cure. Particles of latex can melt together in warmer environments. As a result, painting tends to happen most frequently in the summer. This does not preclude consideration of Spring and Fall, though. While the temperature may be ideal during the day, as soon as the sun sets, dew starts to form on almost everything in cooler temperatures. The timing of the project is more important than you might think because you don’t want it to be too hot either.

Before starting to understand and monitor the temperatures outside and determine if there is enough drying time between coats if you apply a second layer, check your paint label or ask your contractor what the recommended temperature ranges are. A second coat must dry for four hours before being applied to water-based paint, also known as latex paint, which dries more quickly than oil-based products.

Husky hvlp spray gun tips
Husky hvlp spray gun tips – (Image Source: Pixabay.com)

Which spray gun size do I need to paint my car?

A general rule of thumb is that nozzle sizes between 1 point 7 and 2 point 2 are ideal for use with heavy-bodied primers and primer surfacers. Using a 1.4 to 1.6 nozzle is recommended for basecoats. Spraying clearcoats calls for a 1.3 to 1.7 nozzle.

Every painter aspires to produce the best paint job imaginable. What, then, is the secret to a successful paint job?

I simply couldn’t help myself as a male American of red blood. T
here is always room for more tools. Exactly, guys?

Actually, the key to a great paint job is a skilled painter and the appropriate spray gun—note that I said “appropriate,” not “new”. But using a spray gun requires matching it to the task at hand, just like using any other tool.

Husky hvlp spray gun parts
Husky hvlp spray gun parts – (Image Source: Pixabay.com)

What drawbacks are there to using an HVLP sprayer?

Disadvantages. Paint Texture: HVLP guns require thinner coatings for better low pressure spray quality, so highly viscous paints cannot be used in them. Cost: Due to the superior quality of the coverage they offer, they are more expensive than any other.

These days, HVLP sprayers are a growing trend among DIYers. They are handy, simple to use, and adaptable. You can paint almost anything yourself if you have the creativity and tool proficiency necessary. When compared to traditional object painting, using an HVLP sprayer would not only yield satisfactory results but also enable you to finish tasks quickly and easily.

When it comes time to paint, a variety of options become available to the various tools currently available to spread the preferred paint or coating on the desired surface. The use of all these components is extremely broad and diverse, ranging from hand tools like the reliable brush and the slightly more advanced roller to systems powered by electrical and pneumatic systems.

The topic of electric painting tools and their accessories was specifically covered in Of Machines and Tools. By doing this, we can give a thorough introduction to electric paint sprayers and how to maintain them. We can also introduce a practical part, like paint mixers, along with their uses.

Husky gravity feed hvlp spray gun
Husky gravity feed hvlp spray gun – (Image Source: Pixabay.com)

What types of spray guns are used by professionals?

A different kind of fluid spraying technique is used by HVLP (high-volume, low-pressure) paint sprayers. An HVLP sprayer uses compressed air just like a standard air sprayer does, but it does so through a turbine that disperses a lot of air at low pressure in order to atomize the fluid and spray it. HVLP sprayers are the best for precision work and smaller, fine-finish jobs because they operate at lower pressure, which makes them less messy and easier to control. They offer a professional-grade finish with less overspray than airless paint sprayers.

In contrast to the first two kinds of paint sprayers, airless paint sprayers make use of an alternative technology called airless spraying. Without using compressed air or turbines, high-efficiency airless technology atomizes liquid into minute particles. The paint is instead pumped under strong pressure through a spray tip. The fluid separates when it comes into contact with air and forms a spray pattern. Due to their high efficiency and power, airless sprayers are frequently used in the industry for larger jobs.

We hope you found our analysis of the top commercial paint sprayers to be useful. Consult our other guides or go to the Thomas Supplier Discovery Platform to find more suppliers of items like paint rollers, painter’s tape, masks to protect your face from the paint, paint buckets, and paint cleaner.

How to use a spray gun with air compressor
How to use a spray gun with air compressor – (Image Source: Pixabay.com)

What kinds of sprayers do experts use?

Instead of using an air compressor to spray the paint, airless paint sprayers use an electric pump. This type produces the most paint at once because the paint never mixes with air, making it ideal for working on big projects like painting fences or house exteriors.

Because airless paint sprayers can cover large areas quickly, many professional painting businesses use them. In addition to being typically easier to clean, airless paint sprayers don’t typically require thinning paint like some other models.

But if you stay too long in one place, airless paint sprayers can also leave quite a mess on your project as well as around it.

The best places to use airless paint sprayers are in large, open spaces with drop cloths over anything you don’t want to get paint on. Due to the overspray, a lot of paint is wasted and does not reach your project.

How much air pressure is required to paint a car with a paint gun?
(Image Source: Pixabay.com)

How much air pressure is required to paint a car with a paint gun?

If possible, aim for 15 PSI minimum, with 20 or 25 PSI preferable for some applications like clear coat. HP: A 10 HP compressor should be sufficient for auto painting. Higher HP compressors, however, might operate more effectively and serve other purposes.

To compress air and deliver it in a pressurized flow to power another operation or complete a task, air compressors use power produced by a motor or engine. Using compressed air to deliver paint through a nozzle in a powerful yet even flow, air compressors are frequently used in the automotive industry to paint automobiles.

In order to produce a fine mist of paint through a nozzle, an air compressor for painting cars works by breaking up paint with pressurized air. The paint is turned into a fine, liquid particulate by the air compressor used for auto painting, which is ideal for an even coat over the vehicle.

Using a compressor for auto painting is quicker and simpler than using other painting techniques. It also ensures a constant flow, ensuring efficient use of paint. It makes it possible to have complete coverage, even in confined spaces, without manually inspecting each surface for paint coverage.

HVLP or LVLP: Which is better for painting automobiles?
(Image Source: Pixabay.com)

HVLP or LVLP: Which is better for painting automobiles?

  • For clear coats, single stage enamels, and painting automobiles, LVLP makes a fine-atomized spray.
  • Additionally, it paints more slowly than an HVLP, which is excellent for painting intricate details.
  • But an HVLP is better suited to thinned paints like latex and paints more quickly than an LVLP.

Since your spraying requirements will determine which is better, there is no clear winner when comparing HVLP and LVLP.

If you’re a novice user and want to complete a variety of small home improvement tasks, an HVLP unit might be the most useful tool for you.

Video:


Testing the Husky HVLP Spray Gun

On this week’s show, I take you along for the ride as I test out the Husky, HLVP Spray gun from Home Depot. This is my first …



Don’t Buy a Spray Gun Until You Watch This Video

Finishing #spraygun #painting Achieving a professional finish doesn’t have to be expensive. This video will show the spray guns …


Husky Paint Guns: Are They Any Good?
(Image Source: Pixabay.com)

Chelsea Vaughn

Chelsea is a former marine biologist who switched gears in her twenties to build a small house and start a business. She enjoys traveling and going on hiking adventures with her husband, their two Australian Shepherds and their African Grey Parrot.

View all posts

52 comments

Your email address will not be published. Required fields are marked *

  • I somewhat agree with you the pain it is to finish. But the “pop” and ah-ha moment when the finish is first applied to bare wood is what makes the project in my opinion. Unfortunately that ah-ha doesn’t happen with the following additional coats of finish as much. I like your take on the spray booth. I use rattle can finishes with the better finish they provide when I can, and that spray booth would be good for that application as well. Also good point to have multiple projects to spray. The time to clean also those spray guns parts isn’t worth it for a single small project.

  • Suggestion, since two regulators are provided, attach one to each of the guns directly. There should not be a need to have them detachable. The extra fittings youve used adds to the bulk and weight. Also, you may find it hard to maneuver the gun in tight places. I added a 1/4 in. NPT Air Hose Swivel Connector SKU: 8574295 from Princess Auto which allows a lot more freedom to move the hose inside cabinets. It may leak a little air, but dont worry about it, your compressor can keep up and the mobilty aspect is worth it. I’ve found it best to wear a respirator when spraying, even for small jobs.

  • Ken! I gotta say that i could not agree more with your loathing of applying finishes lol. I hate hate HATE applying varnishes to my projects for all the reasons you stated. So hard to get the results i want. I decided to try out Osmo polyx hard wax oil instead and am loving it so far. I`ve tried it on a couple tables and some small stools. It`s an absolute pleasure to use as it`s forgiving to use and a small amount goes extremely far so it`s economical, non toxic and looks great. I might have to check out the HLVP for those projects where Osmo might not be suitable. Thanks for the article. Cheers

  • Great article. I redid a couple metal doors about three years ago using oil based paint. I used both rustoleum and Ace enamel. I used five parts paint and three parts acetone and applied three coats. Looked like a factory painted door. I need to spray some guitar bodies soon and not looking forward to that though. Same intimidation as you on finishing. Going to use Cyrstolac I think it’s called. About 50$ a quart. Probably shoot six coats.

  • I’m not sure why air tool manufacturers don’t realize that users don’t want to unscrew the quick connect fittings every time they put the tool away. I have purchased a couple of tools that had the same problem. I’m looking forward to seeing more articles that use this tool. That paint booth looks like a great idea. Occasionally, my daughter is working on a craft project and manages to get spray paint on the driveway when the wind shifts.

  • I specifically went after lacquer spraying first because I encountered pre-finished drawer sides. I found lacquer so nice because it was hard protection but I could still feel the wood texture. For drawers with stuff moving around in them it is my favorite. Because I wanted lacquer I went overkill and bought a fancier sprayer with its own compressor. Still sized to be well within a hobbyist budget for occasional use. Anything that can spray poly and lacquer are amazing. Those are the two I use for large surface area projects. Not sure what else I would spray.

  • Thanks for the informative article. I learned to use spray finishes at the furniture making program at Algonquin College. Unfortunately that part time program has been ended. I bought a similar kit from Lowes. I found that my compressor was cycling too much for HVLP. I thought of getting a bigger compressor, but the loss of mobility was a big issue. So I sold my Lowes kit and bought a multi-stage unit made by FujiSpray (BusyBee is a distributor). It is amazing. More expensive, but it made a big difference for me. Despite the name, FujiSpray is Canadian too! Definitely agree about the spray booth. I am going to look into the Wagner. I had one from Lee Valley, but my son who is a game designer, needed one for the dioramas that he makes!

  • Great article, so glad you did this article because I have not known where to look for info on this. What you provide is as a new using, pulling the tool right out of the box brand new. With the filter and regulator on there, it looks really awkward and easy to break. With the lazy Susan, you don’t have to worry about spraying from the side. Could you locate the filter and regulator down the line closer to the regulator? Maybe attach somehow to the compressor? Would it make the spray handle easier to handle? Just curious. Thanks.

  • When painting keep your air hose off floor. Use a moisture trap. Use a disposable spray gun filter. They will keep moisture our of your paint. My dad painted cars. Keeping that water out will give you A+ results Also draining your compressor helps. My dad also put the end of the spray gun in the Paint cup with thinner to keep them clean. Hope this helps. Love your articles Thank You!

  • I know you like building kids toys out of wood. Have you thought about Lincoln logs? It could start easy, with the standard log size, and peak/roof. Or take additional steps like cutting them in half length-wise for the sill log. I am going to make some, and have not like the standard roof, need to figure something to keep them from sliding off. Just an idea.

  • Thank you! I have spent way too much time researching sprayers for a boat project and this article clicked for me to go buy the gravity-fed sprayer. Easy to set up and tune for the right amount of spray for coverage. You did an excellent job at keeping it simple and emphasizing the need to practice a little to get it tuned for the job. As a seasoned college Professor of 31 years, your teaching style is highly tuned as well. I really appreciate your advice.

  • Thanks for this review. I have to say it was very interesting and you seem to be a natural teacher. Also, I enjoyed perusal you pour the paint through the filter using a single hand to hold the paint bucket. Clearly, you are a strong gentleman. I look forward to learning more from you on this website. My wife has some cabinet painting on her “honey do” list so this has been helpful for me, sir. Muchas gracias!

  • Hi, Wes! Thank you for your great spray gun lesson. You’re quite right about no needing of a huge compressor. As i can remember, we used a home vacuum cleaner as a compressor back then at 70s. Its exhaust circuit was the same type as an intake one and our vac was equipped with an optional item – a siphon cap for a standard glass jar. So we can pour some paint into a jar, put a siphon cap and connect a vacuum cleaner’s hose to the exhaust circuit of a cleaner and then switch the vac on. Its exhaust flow was quite enough for a home paint spray work. Greetings from Siberia, Russia.

  • As has been mentioned, Teflon tape should wrapped just the opposite from what was shown in the article. Just as important, the first thread of the joint should never be covered by the tape, as connecting the parts could shear a thread of the PTFE and cause it to end up inside the gun, clogging it forever. Exactly that happened with one of my air staplers, plugging the actuator valve. Better yet, never use tape on a connection like that shown in the article. A tiny air leak will be of no consequence, and the gun is easily disconnected between spraying work. If for some reason the air leak is large — which is unlikely — try a different fitting. Tape or brushed sealant is likely necessary on a permanent system such as shop air lines. Any time a taped connection is separated, all tape must be carefully removed from both the male and female halves, again taking care to keep that stuff out of the system.

  • I absolutely love these articles! They’re so informative and told in such a patient and clear manner, thank you! If i could make one suggest? The audio quality isn’t great. When you’re in your workshop there’s a hard echo. I know that’s tough to address because of all the hard flat surfaces in the workshop. But I’d suggest some portable screens with sheets of foam rubber forming a wall behind everywhere that’s off camera.

  • I have watched several articles that you show how too. Step by step detail instructions you give and so easy to remember the process of ceruse. I want to do this to my kitchen cabinets fearing my lack of not knowing how to apply, sand, products to use and using the Spray gun for the first time. Well, your confident articles and ease of all the transitions makes me feel more adequate in tackling this project. Skeptical on the type of cabinets I have, I believe they are called Nantucket with black grooves on the front panels with being Oak that has turn Orange. I want to rid the orange and make them a light walnut/hickory color that is popular now. Any advice you can give me would be so appreciative. Thank you

  • This was very informative! Thank you! If you haven’t already, can you do a article about how to thin different types of paint and what products to use to thin each type of paint and the viscosity needed and such? I don’t see many articles about thinning paint, especially oil based paint and primer. To someone like me who isn’t an expert, it’s all a mystery.

  • Thank you for taking the time to provide all the details on setting up and using these tools. I purchased a gravity gun the same as yours and had to return it the next day when reading the label and realized in plain view on the outside of the box ” not recommended for any kind of latex paint”. I did more research and asked painters with 30 years experience and they agreed. any other thoughts?

  • Thank you 🙏 for your efforts in putting up “to the point “ articles. Wishing you good healthy happy long life. You are sharing your experience for anyone to benefit from is a great service. And your articles are 100% to the point without a single deviation, which is really 👌 nice. Thank you I watch all your articles and it has helped me . GOD BLESS YOU SIR !

  • Thank you Wes for the comparison. I do have a question, can we use either with an air compressor to apply the BIN Shellac white primer as well? I am looking to paint most of our existing furniture as well as kitchen and restroom cabinets. I hear there’s concerns about the alcohol content. Thank you so much!

  • I noticed a comment about the gun in reference to its time in service for you. You mentioned you have been using this husky model for years and have bought around 5-6 of them. My question would be, do you need to use multiple guns at once or do these guns go bad at some point? If they do wear out, typically how long of a life do you get from them and with what amount of use? Daily, weekly, etc?

  • The reason one works better than the other is likely because they have different needle sizes in the tip different kinds of coatings do better with different tip sizes if you’ve got the wrong tip size for the material you’ll usually have to thin to get good flow and atomization because the coating is to thick for the tip you have basic guns just are what they are when you move up to more expensive guns you can usually buy different tips nozzles etc for a specific coating but basic guns will cover most of what diyers need without having to worry about all that👍👍👍

  • Nice article. I use LVLP but recently bought an HVLP gun. Anxious to try it out, but it’s too cold to spray lacquer. I added some color “pearls” to my lacquer for a color shift effect. However it immediately clogged. I was advised to remove the filter. I do filter the lacquer when pouring it into the container of my gravity gun. I see articles of people spraying metallic paint. The flakes are much larger than the pearl which is an ultra fine dust so I don’t know why it clogs. Do you have any recommendations for avoiding clogs? The people that I bought the pearls from said that my lacquer might be too thin; the pearls need a little extra viscosity. If you are spray clear, gloss nitrocellulose lacquer, what is your thinning formula with and without pearsl (if you use them)? What’s the best gun for spraying latex paint? I tried it with a cheap gun and it was much harder to clean than the lacquer gun. Enjoyed the article.

  • Wow you explained this perfectly. I just moved into my first apartment and o want to paint Hampton bays 60” unfinished base sink cabinet from Home Depot. I love the spray finish and was scared off due to the price and complicated reviews. I’m doing it!!! You really made me understand. Im very artsy so I think I’ll do well! Any suggestions on brand paint primer etc. I will be doing white. Stuck between semi gloss and satin. I love a nice shine that will also clean easily. Thanks so much! I subscribed !!

  • Thank You Sir Wes for your great tutorial article. I always enjoy perusal your articles. And thank you for your time answering questions. I have questions regarding clear finisher. Is it true that some finisher ( like shellac) have expiration? And how do you know if the finisher is expired or bad? Thank you in advance and have a blessed day.

  • great article Wes. Can I ask that you please do a article about your spray booth. Does it use a fan and if so what type? What is the filter material and where do you get it? How do you dispose of solvents like lacquer thinner? How do you get makeup air into the booth and does it have to come from outside? I’m sick of spraying outside, and don’t have $20k to spend on a giant professionally installed booth, so I’m trying to figure out how to build one that will still do a great job. Please please do a article on this! Thanks

  • dude this guy is freaking great. so confident, enunciates and talks slowly so people can understand. does not assume anyone is a professional and covers everything you need to know from start to finish. just purchased a home and looking to paint quickly. think these sprayers would work for bedrooms and wood?

  • Thanks for your tutorial . Just wonder, you said you like to use the gun with 1.8 nozzle for the lacquer ! Well, I think the fact you are using cheap guns ( high volume ) is that you may have a proper compressor (size/hp/cfm) . Actually, I think there is a huge relationship between gun and compressor and will dictate which setup to use. In my case I’ve bought a LVLP ( inexpensive ) ’cause I will use an old 100L comp ( I can’t even can see the model and brand so I don’t have a clue about the CFM range ) and I will use the 1.8 will be for the primer and 1.3 for the base and lacquer . ( please correct me if I’m wrong ) .

  • No one should EVER use a brand new gun right off the shelf . It should always be disassembled and all internal parts should be cleaned and reassembled before use. This is eliminate the packing lubricant that guns are coated with before shipment. If not cleaned adequately, that lubricant can taint and contaminate the coating that you first shot out of the gun . Unless you want silicon fish eyes in your finish you should not just spray right off the shelf . I’m a professional Millworks Finisher of 24 years, this is advice to help people who do not know this .

  • Before I watch further, I have some tips fir you. Add your “Teflon” tape clockwise so it stays in place better when you thread you fitting on clockwise. Use more than you did. Turn it on tightly once it overlaps and stays put. If you pull the tape taught, and carefully wind your piece on, you can avoid any overlapping of your hole. When I have two or three turns on tightly, I like to grab the fitting with my fingers and turn clockwise. This pushes the tape into the threads better, making it easier to assemble and seems to keep more of the tape from pushing up and out. IMO 😉 Thank you for your tips.

  • Not sure if you’ve answered this question but as a new user (will be making my purchase tomorrow), I wish you would have taken us completely through the end. I mean, once you’re done, how do you clean it? I can’t imagine you would disconnect the sprayer from the compressor and not run something through it to clear out the product. Would you please show us that as well?

  • I laughed when Wes said the guns are “inexpensive”. Compared to other paint guns that run in the $200 range, yes. But $70 and $85 is not “inexpensive” for someone who hasn’t bought a paint gun yet, or for a “crafter”, not a professional. When I hear “inexpensive” I’m thinking $20-30, and I know what paint guns run. I bought one for $250 and absolutely HATE it because the cleanup time is over an hour and after spraying a while (I do a lot of things in the evening) no one wants to clean out a gun OUTSIDE in the dark. Mine requires filling it with water and spraying it to clean it. It’s not an air gun, it’s electric. And it was a waste of money. I didn’t have a working compressor at the time and it was recommended by a crafter I follow. It works great, but the cleanup is the problem.Now if someone ELSE would clean up after I’ve sprayed for hours (like the 1288 sq ft basement ceiling) I would love it. Lol. Great article! Very informative!

  • Thank you for the informative article. Have you use an HVLP turbine system like the Fuji? I have a turbine/HVLP system but considering another gravity fed gun to use with my compressor like the one your using here. Also, if you don’t mine what was the needed or tip size on the gravity fed gun in this article? was that also a 1.8? Do you ever thin your clear or paint? I use a Cambell pre-cat lacquer or Cambell’s post cat varnish like Turino and thin it a little.

  • OK after a full view I’m still debating which is best gravity fed sprayer or canister?? seems to me the canister fed siphon system would be better… I will do as you said and experiment some but i need to get these furniture pieces up for sale soon as Christmas is right around the corner and i need to make some $$$ and ppl need well built we paijnted stuff!!! Thanks again for what I did take from yr vid Merry Christmas my friend

  • One tip I’ll give new sprayer when you’re spraying with any kind of gun keep your wrist straight square to the wall etc and move your arm side to side keeping your wrist straight if you do it the other way by moving your wrist side to side you’ll end up with to thick of spray at your start and stops that can run always move your arm not your wrist 👍👍👍

  • I have been using cheap Chinese spray guns. Today I came across an old Binks BBR that I have owned for 40 years. Gave it a clean and tried it out, as not used it for a very long time. It’s FAR, FAR better than the Chinese guns, and if this weren’t the case, I get the feeling that pro sprayers would not be paying $500+ for guns, and would just get Harbour Freight ones for $50.

  • Wes: starting at 1:52, you start calling the first gun you demonstrate the “gravity gun.” Clearly, it is the siphon gun. It is even labeled as such on the box. Even when you show the box again at 6:40, you misidentify it as a spray-cup gun. Then, at 7:20, you finally actually get to the gravity gun.

  • Wes – the description on The Home Depot site indicates this gravity feed gun is not suitable for latex paint. I am not sure if this is due to the presence of water and possible issues with corrosion or if it is viscosity of paint. I am planning to use Benjamin Moore Advanced paint, which is an Alkyd paint that is water based. Any experience spraying this with this gun? Also, I know you downplay pressure setting, but compressors can have output (single stage) to 125 PSI. I am not sure that gun is designed to safely handle 125 PSI. What is the line pressure in your shop that you are attaching to that gun? Keep in mind that consistency in a process is key for duplicating successes. Pressure and volume are 2 variables that come to play here. If you leave pressure ambiguous, results are prone to and extra variable. I love your articles – I particularly liked the Shake panel door article where you have excellent tips. I fabricated mine based on your inputs and they came out wonderful. Even bought the router bit set from internet as you suggested (but mine as received were not matched, and shimming process, which was involved, was necessary to get nice tongue and grove fit). Keep up the nice work! I am a loyal subscriber!

  • Hi Wes, Thanks for showing this can be done and showing it can be done with low pressure. Having said that, I do have some questions… 1) is it low pressure as in I can use a small six or 10 gallon compressor? 2) do you have part numbers for those sprayers? 3) is that an HVLP sprayer? 4) assuming it is and you’re running latex paint through the gravity fed sprayer with low pressure, do you have to dilute it any? 5) finally, any problems with water or oil in the line? Do you run a dryer or any type of filter before the sprayer?

  • Hi Wes, Thanks for this great article, I am almost ready to refinish my cabinets. I like the gravity fed you demonstrated. However I went to Home Depot website and it states that this gravity fed Husky is not suitable for latex paint? You don’t seem to have any issues, is the paint in this article latex? # HC4920SSG|Store SKU # 1000764606 Home Depot Canada

  • Helpful…but what’s giving me a headache is what size of compressor is required for these guns. You said you don’t need a big tank to work these guns but the boxes say 27 and 30 gal minimum required. That’s a big tank. What’s even more confusing is my 20 gal meets the SCFM requirements. It’s frustrating this is so complicated. Even the people at Home Depot, lowes and Menards don’t know.

  • Others have mentioned the improper teflon tape wrapping and I agree with some others, that teflon tape is not required for pneumatic fittings. These fittings have a tapered thread and don’t require tape or compound to seal. Snug the fitting and shoot the gun to test for leaks. If it leaks, tighten another 1/8th turn, test again..and so on. No information concerning compressor size, but the Husky box recommends a 30 gallon compressor. What psi is the regulator on the compressor set to? Is one gun type easier to clean than the other? For the gravity feed style, the paint travels a shorter distance and may be easier to clean or unclog. You failed to mention that the spray nozzle can be adjusted for the degree of spray fan pattern and that the nozzle can be rotated 90 degrees to spray a horizontal fan, or a vertical fan. Maybe the instructions explain all of this, but you didn’t read them….like most of us. LOL

  • Are those HVLP guns? I use turbine air as that pushes low pressure (LP) to my cup and gravity feed. He should have mentioned the air pressure setting from his compressor. That can be tricky with 100-200psi compressors. My 3stage turbine maxes out at 12psi to the gun consistently. No stop and start. The fine tuning of material and air is done at the gun. And nozzle and tip size is important depending on the product your spraying. Ex. latex paint vs. clear lacquer. There is a quality difference between HD sprayers and professional brands. You get what you pay for.

  • I disagree with what you said about pressure. It’s very important. You can control that wit the gauge or at your air source. Most people have their compressors set at max pressure of the particular air compressor. That’s usually 125 to 150 lbs. way way way to high for a spray gun like the ones your showing. I’m very surprised you mentioned it’s not important. I understand you can control air coming in the gun at the bottom with the air Control. However you can’t tell what pressure is coming thru.

  • Dont I need a big compressor? So it does not matter if I have an LVLP or an HVLP spray gun. You say the exact opposite of what other painters say. HVPL requires a lot more air and if the spray gun does not get enough air, the result will not be good. 99.9% of painters say so but do not you? Can you explain yourself in more detail?

  • I am sorry for sounding not positive. But when incorrect information is given, then, the matter needs to be corrected. 1. If this article is aimed at novice users, then bad habits should not be encouraged from the onset. 2. The Teflon tape should be wound in the same direction as the air inlet high flow coupling. Not so that it unravels when tightened up. 3. There is a reason why air pressure guage are used and that is high quality guage do not have a membrane so if there is a drop in line pressure between the air compressor and spray gun. It will still remain the same at the spray gun inlet. How can a novice determine if the air pressure is too high or too low just by feel? Very expensive way to learn?

  • Why not go to a paint store like Sherwin Williams? Every town has a Sherwin Williams lol. And they offer professional grade gear, and a whole lot more knowledge than Home Depot. I paint for a living and I always recommend staying away from Home Depot. Some of their paint is good, and primer, their Sundrys and equipment is junk, and they often times offer “advice” when they don’t have a clue what they’re talking about, because they are educated on Home Depot procedures, where a paint store employs is educated on the chemistry behind paint, WHY something works or doesn’t, etc.

  • “Seeing what works for you” can be a very expensive learning curve. Telling folks they don’t need a pressure gauge is a disservice to new users. It takes time to gain experience. Many paint jobs can be damaged by such advice. Once someone has a lot of experience, then they can adjust the gun by perusal the fan and coverage. Also testing a fan pattern should be done in one pass, not several. The results from a dry application can be a costly experience.

  • The first gun he opens up, is a syphon fed gun, why is he calling it a gravity gun? As well as why doesn’t this man know the proper way to wrap Teflon tape around threads? And for crying out loud, nobody should use a spray gun right out of the box, without cleaning the inside of it first. The manufacturer will put oil and/or grease on the fluid tip needle that you don’t want mixing with your paint. I can’t believe this guy doesn’t know this.

  • Every product has a technical data sheet that provides information on thinning the product, and the optimal pressures, at a specific viscosity. Coating application is not about a feel. This type of article only brings the coatings industry down. Spraying paint has many health, and safety concerns. But you verbally, discouraged reading the instructions. Last time I watch your content.

  • There are three knobs on these paint guns. This is the first article I’ve seen where the function of even one was explained. Why not the other two? I mean, that’s basic. These articles will spend 2-4 minutes making us watch them fill the paint cup, but not show us what the damn knobs do. I mean, that’s basic!! What the hell is wrong with these people?